Processing flow of unilateral loose wire of wire cutting machine tool
Release time:
2024/01/25
Processing flow of unilateral loose wire of wire cutting machine tool
Often wire cutting machines find that the wire is loose and tight on one side, and many methods have been used to deal with it, but they have not been completely solved. The following is the process of processing a single-sided loose wire machine tool, which can be provided for your reference.
Processing flow：
1. Use the method of cutting and processing to reproduce the fault phenomenon first, and record the various parameters of the processing, cutting time and other indicators in detail.After the failure phenomenon reappears, let the relevant personnel confirm that the phenomenon is the same.
2. When processing, it is step by step and verified in sequence. Each step is processed in accordance with the process of analysis-plan-filing-verification-recording.
3. Analyze the cause of the failure, formulate a solution and treatment method, and report it to the technical supervisor for the record.
4. Start to implement the processing method, verify the results after processing, and record them in detail.
5. If the problem is not solved, repeat the process again in accordance with this process.
The above is the processing process of single-sided loose wire of the wire cutting machine for your reference.
Key words:
RELATED INFORMATION
Unit 01B, 25th Floor, Han's Plaza, No. 2 Ronghua Road South Road, Daxing district, Beijing, China
100176