Correctly control the voltage and current of wire cutting


Release time:

2024/01/25

Correctly control the voltage and current of wire cutting     How to correctly control the voltage and current of the wire cutting machine?Let's introduce it to you.   1.The voltage of the fast-moving wire and medium-moving wire cutting machine should be controlled between 70-90V during processing.     2.The processing current depends on the thickness of the workpiece to be processed to determine. Generally, if the thickness of the workpiece to be cut is below 70, the current can be controlled at 2-3A.     3.As for the current jumping to 4-5A all at once, it may be that your walking speed is too fast and the short circuit is caused.     EDM wire cutting is more troublesome, and it is necessary to adjust the pulse interval, pulse width, pulse... the value of the change is too large.     For the same type of wire cutting, the practices of manufacturers are different and the performance is different.The cutting efficiency is also different.     The no-load voltage is the voltage that turns on the high frequency but does not process the workpiece.As the thickness of the workpiece changes during processing, the no-load voltage will also change. During processing, the voltage will be lower than the no-load voltage, which is the so-called load.The thickness is different, and the load is different.     There is a voltage regulator inside the control box of the EDM wire cutting machine and an external rotary switch. The voltage can be adjusted by rotating the switch back and forth (it is strictly forbidden to adjust the voltage and change the pulse width, pulse spacing, and pulse parameters during cutting.There will be a risk of broken wires and destruction of circuit components).

Correctly control the voltage and current of wire cutting

    How to correctly control the voltage and current of the wire cutting machine?Let's introduce it to you.

  1.The voltage of the fast-moving wire and medium-moving wire cutting machine should be controlled between 70-90V during processing.  

  2.The processing current depends on the thickness of the workpiece to be processed to determine. Generally, if the thickness of the workpiece to be cut is below 70, the current can be controlled at 2-3A.  

  3.As for the current jumping to 4-5A all at once, it may be that your walking speed is too fast and the short circuit is caused.  

  EDM wire cutting is more troublesome, and it is necessary to adjust the pulse interval, pulse width, pulse... the value of the change is too large.  

  For the same type of wire cutting, the practices of manufacturers are different and the performance is different.The cutting efficiency is also different.  

  The no-load voltage is the voltage that turns on the high frequency but does not process the workpiece.As the thickness of the workpiece changes during processing, the no-load voltage will also change. During processing, the voltage will be lower than the no-load voltage, which is the so-called load.The thickness is different, and the load is different.  

  There is a voltage regulator inside the control box of the EDM wire cutting machine and an external rotary switch. The voltage can be adjusted by rotating the switch back and forth (it is strictly forbidden to adjust the voltage and change the pulse width, pulse spacing, and pulse parameters during cutting.There will be a risk of broken wires and destruction of circuit components).

Key words:

CL2-400

Filling in your phone and email information will help us get in touch with you in a timely manner and solve your problem as soon as possible.