Daily maintenance of AR-MA machine tools

Release time:

2024-03-13

Author:

Source:

Serial Number	Project	Cycle	Spot check method	Disposal	Remarks
1	Appearance of machine tool and electric cabinet	At any time.	Check the appearance for dirt	Wipe with neutral detergent and water;	Can not use kerosene gasoline and other organic solvents to wipe.
2	Guide	Daily	Check the guide wire nipple for blockage and damage;	Use soft brush and weak acid to clean or replace when damaged;	Recommended use cycle 3 months
3	conductive block	Daily	Check for deep trenches or foreign objects;	Use soft brush and weak acid to clean, and change the contact surface position	Recommended use cycle 3 months
4	Guide wheel	Daily	Check whether there is a deep groove and whether there is jitter during wire transportation.	Clean or replace	Recommended use cycle 3 months
5	Guide wheel bearing	Daily	Whether there is jitter and abnormal noise during wire transportation	Replacement	Recommended use cycle 1 month
6	Electrode line	Weekly	Inspect the electrode wire for damage. Tighten the terminals. When the machine tool is moving, if the electrode wire is caught, measures should be taken to avoid.	Use tape to wrap or renew	Aging, fracture should be replaced in a timely manner.
7	Filter	Monthly	Whether there is blockage	Cleaning	Replace when damaged
8	filter paper core	Weekly	Whether the water is sufficient and the cutting fluid is clean;	Replacement (only with high 120L water tank)	Recommended use cycle 1 month
9	cutting fluid	Weekly	Whether the cutting fluid is sufficient and clean	Add or replace	Recommended use cycle 1-2 months
10	Cleaning inside the electric cabinet	Quarterly	Check whether the circuit board and components are dusty and greasy	Clean	Use a water-free gas gun to blow clean, or clean with a brush;
11	Silk bucket	Six months	Check for flexibility and abnormal sound	Check whether the automatic lubrication works normally	Contact with service personnel for technical support
12	U, V axis lead screw	Six months	Check for flexibility and abnormal sound	oil injection lubrication	Contact with service personnel for technical support
13	X, Y axis screw	Six months	Check for flexibility and abnormal sound	Check whether the automatic lubrication works normally	Contact with service personnel for technical support
14	Z-axis	Six months	Check for flexibility and abnormal sound	oil injection lubrication	Contact with service personnel for technical support

Note:

1. During the use of the machine tool, correct lubrication and maintenance can prevent excessive wear of machine parts and system damage, and extend the service life of the equipment;

2. If lubrication and maintenance are not carried out in time, the service life of the machine tool will be greatly shortened, the wear of parts will be accelerated, and the accuracy of the machine tool will be affected.

Key words:

AF Machine Routine Maintenance

WEDM Guide Wheels Affecting the Surface Roughness of Middle Wire Cutting

AF Machine Routine Maintenance

WEDM Guide Wheels Affecting the Surface Roughness of Middle Wire Cutting

RELATED INFORMATION

Our company participated in China CNC machine tool exhibition and won the CCMT2024 Chunyan Award

2024-04-17

Correctly control the voltage and current of wire cutting

2024-01-25

How to deal with the “filigree” phenomenon of medium wire cutting machine tools

2024-01-25