AF Machine Routine Maintenance
Release time:
2024-03-13
Author:
Source:
|
Serial Number |
Project |
Cycle |
Spot check method |
Disposal |
Remarks |
|
1 |
Appearance of machine tool and electric cabinet |
At any time. |
Check the appearance for dirt |
Wipe with neutral detergent and water; |
Can not use kerosene gasoline and other organic solvents to wipe. |
|
2 |
Electrode line |
Weekly |
Inspect the electrode wire for damage. Tighten the terminals. When the machine tool is moving, if the electrode wire is caught, measures should be taken to avoid. |
Use tape to wrap or renew |
Aging, fracture should be replaced in a timely manner. |
|
3 |
filter paper core |
Weekly |
Whether the liquid is sufficient and the processing liquid is clean; |
Replacement |
Recommended use cycle 2 months |
|
4 |
float |
Weekly |
Check whether the float of the liquid tank and oil tank is normal. |
Clean or replace |
|
|
5 |
Machining fluid |
Quarterly |
Whether the machining fluid is sufficient and clean |
Add or replace |
|
|
6 |
Cleaning inside the electric cabinet |
Quarterly |
Check whether the circuit board and components are dusty and greasy |
Clean |
Use a water-free gas gun to blow clean, or clean with a brush; |
|
7 |
X, Y, Z axis lead screw |
Six months |
Check for flexibility and abnormal sound |
Check whether the lubrication is in place |
Contact with service personnel for technical support |
Note:
1. During the use of the machine tool, correct lubrication and maintenance can prevent excessive wear of machine parts and system damage, and extend the service life of the equipment;
2. If lubrication and maintenance are not carried out in time, the service life of the machine tool will be greatly shortened, the wear of parts will be accelerated, and the accuracy of the machine tool will be affected.
Key words:
Next Page
Next page:
RELATED INFORMATION
Unit 01B, 25th Floor, Han's Plaza, No. 2 Ronghua Road South Road, Daxing district, Beijing, China
100176